- Trade 800lb for 900lb spring
- 9spd shifter + chainguide
- disc brake
- Rear Wheel
- xc forks
- Read the rules & use the template please.
- solid forks
- Rear disk wheel
- shock pump
- DJ Bike...
- Any sort of 26" Stock trial bike
- 58cm road bike
- Wanted to Buy Templates - MUST USE
- Stock Trials bike..
- Template!
- wanted boxxer through axle
- DJ fork
- .243
- drive train parts
- 02 shore/01 team 03 drop/atomik
- Santa Cruz VPP Free
- Wanted to Buy Templates - MUST USE
- chain guide
- 150mm forks
- LEVERS LEVERS
- cheap dj fork
- Wanted to Buy Templates - MUST USE
- want to swap XT cassette for ultegra
- Read the rules... use the template please!
- WTB: Worn Plazmatic CRV backings
- wanted
- SHIVER SC
- forks
- frount qr wheel
- Dj/street frame $450
- Wanted to Buy Templates - MUST USE
- 2 front wheels(need one disk) and 1 back wheel (disc)
- QR 20mm Front Hub
- Cheap arse cranks for my heavy-as singlespeed commuter
- Good Hartail Frame
- Single Crown Forks
- STP1 or STP2
- Templates needed - please.
- rear 10mm hub
- Boxxer preload spacers
- decent dj 4x hardtail complete
- hartail frame and fork. free-ride, dirt. 0-$500
- cheap hard tail under 600
- mrp chainguide trade
- Found
- maxxis holyrollers
- Hayes 6" rotor
- XT hollowtech 2 cranks
- DMR wing bars
- Old fork parts..elastomers etc.
- Wanted to Buy Templates - MUST USE
- DJ FORK 20MM axle
- Wanted to Buy Templates - MUST USE
- NORCO MANIK Anyone got one !!
- dj I ,II or III wanted
- Front disc mount
- SUPER T WANTED BADLY
- Norco 125 or Giant STP 1
- forks
- Norco Sasquatch 2004 model
- Short cranks
- WANTED: Seatpost
- Hayes 8" rear adapter
- *delete*
- manitou - xt 4 pot adapter
- horizontal dropout frame
- TRIAL 26" STOCK BIKE
- cable discs
- Boxxers: Race or team
- WTB: Cheap Mobile
- rear shock
- Cheap $40-$50 Fork
- intense m1/orange 222
- 125-130+mm forks
- Anything Grimeca System 8
- delete delete
- 02-04 Damaged Psylo's for parts
- 24" rear wheel or F+R set
- chain guide
- sram
- 12mm rear 135 axel
- very desperate for a DJ fork
- Marz Shiver springs
- 31.6 seatpost
- 31.4mm seatpost
- 8spd shifter
- DULIE AROUND 2000
- bars & stem
- 24" wheels-Dj bar and stem
- Fox vanilla coil shock.
- dabomb projectile
- shock pump
- Rigid Forks, Eg Kona Project II
- Rigid Forks, Eg Kona Project 2
- A chainguide under $100
- DJ / FREERIDE RIG.
- DJ/FREERIDE RIG.
- Hard tail DJ / Freeride.
- Wheel Truing Stand
- Santa Cruz Chameleon
- rear shock (coil) 230mm eye to eye
- rear shock (coil) eye to eye 230mm
- bmx style sprocket
- Santa Cruz Chameleon
- Santa Cruz Chameleon
- cheap old bmx
- Santa Cruz Chameleon
- Santa Cruz Superlight
- qr front wheel
- Hardtail - very specific requirements
- Cheap Marzocchi Jrn T's
- Sweet Hardtail Up to $1200
- YETI DH 9
- '01 Carbon X-Vert Lowers
- DH/DJ/Street Hardtail or Dually for $1000 or under
- Possibly needing a TEMPLATE!
- wanted: a (preferabley new) chain device
- 2x Chainguides
- Crankset + BB
- FSA xc 115 or XC120 stem
- Aireal 4 arm 104PCD DS bashplate
- 42T DH (5arm) cog wanted will swap for 46T Raceface
- Template
- found
- Disc Brakes
- 30.4mm seatpost
- need 68 mm bb
- Boxxer 151's or similar cheap DC's
- Hayes Template!
- Hayes Brake Lever
- SWAP - armour rear for armour\dice\etc front
- found
- forks
- 9 speed roadie casette
- Camelbak Blowfish or similar
- single speed hub
- Bottom Bracket and/or rear hydro
- Hayes Mechanical Caliper (MX2 or similar)
- Mrp chainguide
- 9 SPEED CASSETE
- Chainring and spider
- Hayes hydro cable for rear
- ISCG chainguide
- DMR Trailstar frame
- shimano saint cranks and e.thirteen
- found
- Shiver SC's excepting all offers
- road deraileur and casette
- Broken Marzocchi's or Working inside parts
- Cranks, seat, lever
- Straight Fork
- NEED GOOD HARDTAIL - SUCH AS STP1, NORCO RAMPAGE.. ETC
- CHAIN DEVICE (will pay $50-80) depending on condition
- Rear shock
- BUYING SASQUATCH,MANIK OR ANY GODO HARDTAIL
- Downhill / Huck frame
- Again without a template!!!!!
- Rear spring for Fox Vanilla RC
- rear shock spring/or new rear shock...please help
- i want shermans
- Dually DH Frame
- fork
- front disc hub
- 200mm+ stear tube lower crowns for 03 manitou sliders
- DMR frame (trailstar or sidekick)
- carbon top cap (for headset)
- Manitou Sherman Flick 05 model
- Forks
- Found
- shock pump
- template
- shermans
- i should have read the rules!!!!!
- template
- Steel hardtail frame
- rims or cheap wheels
- Wanted: Parts and frame for DJ rig!
- 200mm rear shock
- Keewee CromoZone Frame
- hydrolic disc barkes.
- dual crown or single crown forks.
- DNM USD disc adaptor (trade or buy)
- Boxxer Axel Bolt
- Manitou Sherman Flicks/ Flick Plus 2004/05
- delete this.
- Found
- Wanted: TEMPLATE
- Dj street frame CHEAP - $200
- template
- DJ/FR forks
- Chain Guide's
- Need Boxxers asap Please
- Wanted: Front wheel w/20mm Hub
- Wanted - Someone to read the rules to me!
- 8.5 x 2.5 Fox Vanilla RC
- wanted: new or used dirt jump hardtail
- MRP MINI swap for MRP DH
- wanted: Chainguide
- 31.8 oversize stem
- chain guide
- Wide handlebars / trials bars
- spider for Da Bomb cranks
- bmx cranks bb and sprocket
- use the damn template.
- Strong Rim
- E 13 Chain guide
- need a 400-450 pound spring
- deletage
- Right 170mm ISIS crank arm (5 arm spider preferred)
- 26" 36 hole mag 30 in new condition
- **WANTED** Shimano 9 spd cassette and chain.
- 2004 XT 8" disc brakes
- STP 1 or Zero
- Marzochhi Shiver SC
- WTD COMPLETE BIKE UNDER 1200K
- Hydros
- no longer needed - please delete
- Any 01/02 Marzocchi singlecrown with 20mm lowers
- tripple clamp forks
- Absolutely nothing...
- WTB: hacked up Sqr taper cranks
- Templates please.
- bike parts wanted badly
- anyone got them!
- Drop Crown for Manitou X-vert DC
- Cable brake levers - preferebly Avid
- please delete, not needed anymore.
- Orange 222 or 223
- Any ISCG Chain device
- 300lbs Ti Coil
- DAINESE BODY ARMOUR
- I WANT YOUR HARDTAIL
- single crown DH forks
- hope hub
- 4 Bolt 6" disc rotor for Magura's
- BMX Chainring
- Drop out
- cheap duely frame
- Inverted Forks
- Repair Stand
- Beginner Dh frame
- frame for whole bike!
- chain device and shivers
- Rear shock for Proflex (Noleen NR2 or 4)
- 20mm front wheel & rear wheel