Regan
08-06-2008, 02:13 PM
SOLD
Item: 2008 Giant Glory Frame + parts, Medium
Location: Newcastle
Item Condition: Excellent! Only used a handful of times. A few minor scratches on the top tube. The most major thing is a slight dint near the head tube on the right side of the frame from the fork bumper being too low... It does not not effect the frame at all and you wouldn't notice it unless it was pointed out.
Reason for selling: 08 V10...
Price and price conditions: $1350 FREE POSTAGE, or $1000 + post for just frame (with standard steel axle and standard silver linkages), headset and shock
Extra Info:
This is one VERY Custom Glory frame!
It’s been raw polished (What a mission!) and then professionally painted a Mitsubishi metallic blue on the front. The paint has been removed from the head tube logo and been polished also. The polished areas have not been clear coated so if it gets a scratch you can just wet sand and polish it out!
The linkages are from a Glory Expert/Comp frame. There the same shape as standard only black and slightly lighter. The original silver linkages (with original new bearings installed) will also be included in the sale.
The Upper shock eyelet on the DHX 5.0 Shock has been fitted with a Enduro Roller bearing pivot with custom made hardware. They last 10 times longer than the standard alloy reducers/bush setup and only cost $17 to replace!
I’m also including a flush Cane Creek sealed headset, Spare derailleur hangers and shock guard and super light alloy 224 Axle
All in all it’s one STUNNING looking Frame!
Parts included with frame are:
08 DHX 5.0 Shock w/ 450lb steel spring – With Enduro Roller bearing pivot and custom made hardware
Sealed bearing Headset - Cane Creek Flush lower cup, stock FSA cup top, both with Cane Creek Sealed cartridge bearings
2x Spare derailleur hangers – One to suit Maxle and the other just standard
Spare shock guard and mounting hardware
Standard Silver linkages with all replacement pivot bearings and shafts
Aluminum Orange 224 axle (MUCH lighter than stock steel unit)
*PLEASE NOTE* TI SPRING & SEAT POST IN PICTURES ARE NOT INCLOUDED IN THE SALE
Pictures: Attached Below
Item: 2008 Giant Glory Frame + parts, Medium
Location: Newcastle
Item Condition: Excellent! Only used a handful of times. A few minor scratches on the top tube. The most major thing is a slight dint near the head tube on the right side of the frame from the fork bumper being too low... It does not not effect the frame at all and you wouldn't notice it unless it was pointed out.
Reason for selling: 08 V10...
Price and price conditions: $1350 FREE POSTAGE, or $1000 + post for just frame (with standard steel axle and standard silver linkages), headset and shock
Extra Info:
This is one VERY Custom Glory frame!
It’s been raw polished (What a mission!) and then professionally painted a Mitsubishi metallic blue on the front. The paint has been removed from the head tube logo and been polished also. The polished areas have not been clear coated so if it gets a scratch you can just wet sand and polish it out!
The linkages are from a Glory Expert/Comp frame. There the same shape as standard only black and slightly lighter. The original silver linkages (with original new bearings installed) will also be included in the sale.
The Upper shock eyelet on the DHX 5.0 Shock has been fitted with a Enduro Roller bearing pivot with custom made hardware. They last 10 times longer than the standard alloy reducers/bush setup and only cost $17 to replace!
I’m also including a flush Cane Creek sealed headset, Spare derailleur hangers and shock guard and super light alloy 224 Axle
All in all it’s one STUNNING looking Frame!
Parts included with frame are:
08 DHX 5.0 Shock w/ 450lb steel spring – With Enduro Roller bearing pivot and custom made hardware
Sealed bearing Headset - Cane Creek Flush lower cup, stock FSA cup top, both with Cane Creek Sealed cartridge bearings
2x Spare derailleur hangers – One to suit Maxle and the other just standard
Spare shock guard and mounting hardware
Standard Silver linkages with all replacement pivot bearings and shafts
Aluminum Orange 224 axle (MUCH lighter than stock steel unit)
*PLEASE NOTE* TI SPRING & SEAT POST IN PICTURES ARE NOT INCLOUDED IN THE SALE
Pictures: Attached Below