Found

[mike-]

FOUND

(10 char limit)

[mike-]

Anyone even know where to buy one?

Just the metal adapter so I can use the current ISCG-05 mount design with a frame with older ISCG mounts.

[Daver]

As far as I'm aware, no one makes and ISCG-OLD to ISCG 05 adapter. You'd need to buy the backplate that suits your ISCG pattern.

[mike-]

This is what I'm after, I know E-13 makes them, it is to fit the new style E-13 back plate onto my frame with Old style mounts.

I may have writen it around the wrong way.

But this is it:
http://img216.imageshack.us/img216/2058/e13adapterxr4.jpg

[Daver]

This is what I'm after, I know E-13 makes them, it is to fit the new style E-13 back plate onto my frame with Old style mounts.

I may have writen it around the wrong way.

But this is it:
http://img216.imageshack.us/img216/2058/e13adapterxr4.jpg

That adaptor is for frames where the ISCG-OLD mounts are off (Intense M1's and a few others. It is NOT and ISCG-OLD to ISCG05 adapter.

EDIT: http://www.e13components.com/product_iscg.html

[mike-]

I am appriciating your help Daver, not trying to be rude and prove you wrong, just finding out what I need...

What does this adapter do?

http://img503.imageshack.us/img503/318/e13adapter2dy6.jpg

[Daver]

I am appriciating your help Daver, not trying to be rude and proce you wrong, just finding out what I need...

What does this adapter do?

http://img503.imageshack.us/img503/318/e13adapter2dy6.jpg

That adapter is the standard ISCG-OLD adapter- for frames running no ISCG mounts, and an ISCG-OLD chainguide. The next one down is the one for an Intense M1- basically the ISCG OLD mounts were off and you were unable to get the proper fitment for an E13. The adapter essentially rotates the ISCG-OLD bolt pattern forwards, so it fits. The final adapter is for an ISCG-05 chainguide to a frame with no mounts. Its basically the same as the ISCG-OLD adapter, just bigger.

A new backplate (for an E13) should be around $60 from your LBS- I beleive most other chainguides are in the same boat. These will solve any problem.

[mike-]

Daver, THANK YOU.

I went and drew on my current adapter thing you try show you what I need, but I can see now what is wrong.

Without actually having the apdapter in my hand looking at the computer screen I didn't notice how it stretched out a little bit in my one compared to the one I thought I needed.

So E-13 still sells backplates for the E-13's with ISCG-OLD mounts?

Do you know of any online places to get them?

http://img231.imageshack.us/img231/7823/dsc03012qy4.jpg

[mike-]

I edited the original post to what I really need.