DEITY Vendetta cranks Now available

[nicho]

http://www.deitycomponents.com/Vendetta%2008/vendetta08.jpg


WELL WELL WELL,

Two thousand eight Products are slowly rolling in from Deity components and as planned the New Vendetta cranks are pre released from their complete range.
The Vendetta cranks are absolutely stunnig in all aspect and gives a new meaning to easy to use/maintain three peice cranks market.
The cranks with a full instruction manual dust caps, spacers for a perfect chainline and even with a small bag of grease for the spindles.
How good is that ?
The Vendetta cranks aren't just a run of the mill bmx type three piece cranks.
They are very light (ti spindle optional) 930g with cromo spindle and 820 grams with a ti spindle and that including bottom bracket etc....

If you are after a set of the new DEITY Vendetta cranks give a buzz to your local bike shop they can order some for you and your gang.
You won't be disappointed!!!!

Pricing is to be annouced. But Prices will not go up and will quite probably remain same as the previous cranks which was around the $390 point.

Here is all you need to know about 2008 DEITY VENDETTA cranks.

http://www.deitycomponents.com/Vendetta%2008/vendettamainSPECS.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURES83mmbbkit.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURESselfextracting.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATUREStispindle.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURESbearingspacer.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURESchainlinespacer.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATUREShardware.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURESfinish.jpg
http://www.deitycomponents.com/Vendetta%2008/FEATURESshortstack.jpg
http://www.deitycomponents.com/Vendetta%2008/vendettaDESIGN.jpg
http://www.deitycomponents.com/Vendetta%2008/vendettaBBKIT.jpg
http://www.deitycomponents.com/Vendetta%2008/vendettaWARRANTY.jpg


If you have any questions feel free to email us at Rouler@rouler.com.au
or send us a pm.
If you want to know more about products and the 2008 line up go to
www.rouler.com.au

If you just can't wait and wish to have a chat about it give us a call on 0402 138 508 and we'll happily be your help line for tech support.

Let the good times roll.

NICHO

[2fst4u]

wow just soo sexy

[j5ive]

Ordered. Can't wait to check these suckas out.

[j5ive]

Installed. Wow. Awesomeness. Smidge lighter than the profile race they replaced and look badass.

[nicho]

did you find them easy to install ?
How cool are the dust caps etc...

nicho

[j5ive]

Installation was cake. Very in depth instructions. Mind you I decided to read them after I put the cranks on. Used my old BB for now as the frame is getting swapped out soon.

Love the crank extractor bolts- which also prevent the bolts ever coming undone. A lot of thought has gone into this product. The cranks slide on nice and smooth when bolted up. I was worried about having too wide of a stance with these over the profiles, but they only sit a few mm wider and feel bloody solid. I also saved over 50 grams with the switch.

Stoked nicho, bring on the matchin NPJ frame...

[jacobmy20]

WOW look great, I'm dreaming though!

[Kawasaki 122]

Well they look sweet..

Was there a weight? I wasn't sure..
I think Deity have really stepped it up. Cranks really do look solid

[deaks]

Well they look sweet..

Was there a weight? I wasn't sure..
I think Deity have really stepped it up. Cranks really do look solid

The Vendetta cranks aren't just a run of the mill bmx type three piece cranks.
They are very light (ti spindle optional) 930g with cromo spindle and 820 grams with a ti spindle and that including bottom bracket etc....


............

[Cameo]

torrid meets race?

very nice looking cranks, diety always bring the shit, but i need cash big time!

[clockworked]

what did the cost of these cranks end up being?

edit: its listed quite clearly on your site!