STP RIDER123
17-10-2008, 09:14 PM
this is my brothers bike so here it is
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1929
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1928
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1927
*Frame: Colony Endeavor Full CrMo 20.75”TT 13.75” rear, 74.5º HA, 71º ST, MID BB, Integrated HS
Removable gyro tabs(not inc.) and built-in seat clamp. Smaller diameter tubing all round with slimline dropouts.
*Forks: Colony full CrMo, 2pcs steerer tube.
*Brakes (rear): Tektro.
*Brake lever (right): Dia-Comp Tech 77.
*Cables: oddysey Linear slick white
*Headset: Colony Integrated.
*Stem: Alloy Front load.
*Handlebars: Colony full CrMo.
*Grips: Wethepeople Rhombus.
*Sprocket: Colony Endeavor 28t CNC 6061 T6.
*Crankset: CrMo Tubular 48 spline, sealed mid BB.
*Chain: KMC Z510.
*Pedals: animal hamilton plastics
*Rims: Alex 36h (Black front, Chrome rear).
*Tyres: Maxxis M-Tread (2.1 front, 1.85 rear).
*Spokes: Black steel.
*Hubs:
Front - 3/8” axle, sealed bearing low flange.
Rear – Joytec cassette, 14mm axle, sealedw/10t.
*Pegs: Steel 3/8” and 14mm (1 x each).
*Seat: Colony Mid Pivotal™ mid seat.
*Seatpost: Colony Pivotal™ Alloy.
*Weight : 12.5kgs or 27.5lbs
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1929
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1928
http://www.farkin.net/forums/picture.php?albumid=367&pictureid=1927
*Frame: Colony Endeavor Full CrMo 20.75”TT 13.75” rear, 74.5º HA, 71º ST, MID BB, Integrated HS
Removable gyro tabs(not inc.) and built-in seat clamp. Smaller diameter tubing all round with slimline dropouts.
*Forks: Colony full CrMo, 2pcs steerer tube.
*Brakes (rear): Tektro.
*Brake lever (right): Dia-Comp Tech 77.
*Cables: oddysey Linear slick white
*Headset: Colony Integrated.
*Stem: Alloy Front load.
*Handlebars: Colony full CrMo.
*Grips: Wethepeople Rhombus.
*Sprocket: Colony Endeavor 28t CNC 6061 T6.
*Crankset: CrMo Tubular 48 spline, sealed mid BB.
*Chain: KMC Z510.
*Pedals: animal hamilton plastics
*Rims: Alex 36h (Black front, Chrome rear).
*Tyres: Maxxis M-Tread (2.1 front, 1.85 rear).
*Spokes: Black steel.
*Hubs:
Front - 3/8” axle, sealed bearing low flange.
Rear – Joytec cassette, 14mm axle, sealedw/10t.
*Pegs: Steel 3/8” and 14mm (1 x each).
*Seat: Colony Mid Pivotal™ mid seat.
*Seatpost: Colony Pivotal™ Alloy.
*Weight : 12.5kgs or 27.5lbs