Hayes drag

[Refreshinglygood]

I've just bled my brakes, now they are dragging to the point that the wheel doesn't turn. I push the pads back into place, centre the caliper, and squeeze the brake, after 2 or 3 squeezes, the calliper is locked onto the disc again.

Any suggestions?

Cheers

[ajay]

Are they hayes 9s?

[dh rider]

ride down a hill with the brakes pulled on maby :?:

[Avanti_Racing]

by dragging you mean...

if you mean rubbing then loosen the caliper to mount bolts, squeeze the lever as hard as you can (MAKE SURE the calipers on the dam rotor, while applying ressure tighten the caliper to mount bolts back up tight, then release lever, all should be straight, i bet im wrong with the draging thing