Carlin
15-02-2005, 05:30 PM
Item: Brisa B26 Stock Trials Frame and Brisa trials fork
Location: Northern Beaches Sydney
Item Condition: Good, Very small 1-2mm dints on underside of downtube (common on used trials bikes), scratch from deraileur cable on RHS seatstay, otherwise a scratch here and there, no cracks. The aluminium fork is tarnished but is in good working order.
Reason for selling: Saving to go overseas this winter and cannot afford to build this frame up right now.
Price and price conditions: $500 with bottom bracket, seatclamp, seatpost, Magura brake mounts, and Blackspire Granny God bashguard.
Extra Info:
I can include a good quality FSA 118mm spindle bottom bracket that will allow you to run your granny ring with no clearance issues.
There are no disc brake mounts on either the frame or fork. The frame is Magura specific and requires specific Magura mounts. I can include these, so all you need is a Magura hydrolic rim brake.
This frame has a slightly more street oriented geometry than a UCI comp style frame. That is it's a little shorter in the top tube and longer in the stays, however it is still great to throw around and bunnyhop. This frame is super light at around 1.7kgs. It has been resprayed black for a good stealthy look. The bottom bracket, brake mounts and head tube were all professionally faced after the respray, and the cable guides were drilled out by Stan at BA to run a full length canle housing.
This frame retailed for about $900 new.
I may be able to include some more parts if you need them, PM me for more info.
Pictures: As attached.
Location: Northern Beaches Sydney
Item Condition: Good, Very small 1-2mm dints on underside of downtube (common on used trials bikes), scratch from deraileur cable on RHS seatstay, otherwise a scratch here and there, no cracks. The aluminium fork is tarnished but is in good working order.
Reason for selling: Saving to go overseas this winter and cannot afford to build this frame up right now.
Price and price conditions: $500 with bottom bracket, seatclamp, seatpost, Magura brake mounts, and Blackspire Granny God bashguard.
Extra Info:
I can include a good quality FSA 118mm spindle bottom bracket that will allow you to run your granny ring with no clearance issues.
There are no disc brake mounts on either the frame or fork. The frame is Magura specific and requires specific Magura mounts. I can include these, so all you need is a Magura hydrolic rim brake.
This frame has a slightly more street oriented geometry than a UCI comp style frame. That is it's a little shorter in the top tube and longer in the stays, however it is still great to throw around and bunnyhop. This frame is super light at around 1.7kgs. It has been resprayed black for a good stealthy look. The bottom bracket, brake mounts and head tube were all professionally faced after the respray, and the cable guides were drilled out by Stan at BA to run a full length canle housing.
This frame retailed for about $900 new.
I may be able to include some more parts if you need them, PM me for more info.
Pictures: As attached.