BMX's

[Huck_This]

I can't decide which bmx to buy out of these three, honestly i don't really know much about bmx's so i can't choose between them. im just looking for a solid freestyle bmx that can handle some abuse. Which one do you recomend?

GT Performer Specs:
Rims: Alex G22, aluminum, 48 hole, 30mm width
Tyres: GT Air Bags, 20x2.1
Front Brake: Tektro, 907A, forged aluminum U-brake
Rear Brake: Tektro, 907AD, dual anchor bolts, forged aluminum U-brake
Brake Levers: Tektro, 319AC, aluminum
Handlebar: GT dirt/street bend, Hi-Ten, 7" rise
Stem: GT Johnson III design, cold forged aluminum
Headset: Tange Seiki FATTY 22, extra deep cup engagement, 1-1

Phantom cycles is selling for $429

FELT Mystic Specs:
Fork: 4130 CR-MO, Butted Steer Tube, 1-3/8" Blades, Weld-In Nut, 6mm Dropouts
Stem: Felt "Drop Ten" FS/Trail Design, Alloy Threadless 1-1/8", 10mm Drop
Handlebar: Felt 4-Piece "Cocktail" Bar, HI-TEN, 655mm Width
Grips: Felt FS / Trail Design, Kraton Rubber
Headset: Felt "FUH" Cup, Oversized Lower Cup, TH#864
Rims: Alex F22 Tall Sidewall Aluminum 48H, 32mm Wide
Hubs: Felt "Double-Drive" Aluminum Flip-Flop 48H, 14mm Front and Rear Axle, Loose-Ball Front / Sealed Bearings one Side Rear
Tires: Felt "Brake-Show" Free-Style 20 x 2.0 Front/Rear
Brake Rear: New Lower Profile Model Tektro Die-Cast U-Brake
Brake Front: New Lower Profile Model Tektro Die-Cast U-Brake

Torpedo7 is selling for around $415au

FELT fuse Specs:
Frame: 100% 4130 CR-MO tubing, trail design, NEW 20.8" TTL, Tapered Top Tube, Grind Sheild 6mm Dropout, Machined HT & BB, Weld-on Gyro Tabs, New Seat Stay Mounted Brake Bossess. New London Mod Brake Device for Better Braking.
Stem: Felt "Drop Ten" FS/Trail Design, Alloy Threadless 1-1/8", 10mm Drop
Handlebar: New Felt "Wheelie Bar", 605mm Width, 185mm Rise, Chromoly
Rims: Alex #MUS16 Tall Sidewall 4-Chamber, 48H
hubs: Felt "Double-Drive" Aluminum Flip-Flop 48H, 14mm Front and Rear Axle, Loose-Ball Front / Sealed Bearings one Side Rear
Tires: Felt "Slip-Not" Dirt / Trail 20 x 2.25 Front; 20 x 2.0 Rear
Brake Rear: New Lower Profile Model Tektro Die-Cast U-Brake
Brake Front: Tektro Aluminum Caliper (Int'l only)

Torpedo7 is selling them for around $415au

Thanks

[*morison*]

I bought a felt bmx of torpedo 7 it was awesome great site. i would go with the felt fuse for freestlye- the felt slip-knot tyres are really verstitile much like maxis holllyrollers and felts are designed tough although very light. pm when you decide

[Wattsy]

Huckthis, just remember, Buy it local because they will be almost the same price, and it will be fully assembled for you. Cause you don't wanna get it in a box and have to do it yourself, risking not doing it right. Aswell, for torp, you aint gonna get warrenty, and for a full bike, your gonna want it.

[wombat]

It may well be out of your price range, but I've been pretty impressed by the Perv "Lewd" (I think it's the Lewd anyway).
Cro-mo mainframe, Euro BB, nice feeling geo.
Sealed 3pce crank, sealed front hub and sealed cassette rear.
Rhino Lite rims and some nice finishing kit in the stem and post etc.

We've sold a few of them and the only problem we've come across so far was a blown bearing in the BB. It was only a single bearing cup, but it was covered under warranty and replaced with a new double bearing BB set.

You'll find them selling for about $549, but you could probably get one a bit cheaper from your local dealer if you try.

[Constable Care]

try the WTP Addict or darkness, both good stock bikes but the addict is better ass it has a full chromo frame.