Sold

[oleitch]

Item: 2005 norco 250 custom specs, custom paint!
Location: nelson bay, (50min north of newcastle)
Item Condition: perfeccctt... original tyres, 80% tread. I know its 2005, but its hardly been used at all. Can do any colour paintjob for price of paint
Reason for selling: dont have time to ride despite wanting to do so.
Price and price conditions: Cost over $2800 new, now $800 MAKE AN OFFER! :)

Extra Info: will post- u pay.

spec list:

FRAME: Chromoly double butted jump/urban frame, slotted 14 mm dropout, Grind guard gussets , APS dual V, 3 pos. disc 24/26" wheel fi

FORK: Manitou Sherman Flick Plus 110-155 mm, Hex 20 mm axle, FFD dampened, street / trail fork

HEADSET: FSA deep cup Stainless
CRANKS: Truvativ Holzfeller double w/bash guard
BOTTOM BRK: Truvativ ISIS Giga splined
PEDALS: Truvativ Hussefelt flat
CHAIN: Sram PC 59
FREEWHEEL: Sram PG 11-34 9 spd
FRONT CHANGER: Shimano Deore xt can be included to get the front 2 rings going.
REAR CHANGER: Shimano Saint '' '' '' ''
SHIFTERS: Shimano Deore xt
BAR: Titec El-Norte 1.5"
STEM: Titec El-Norte DH
FRONT BRAKE: Hayes HFX-9 8"hydraulic disc
REAR BRAKE: Hayes HFX-9 8"hydraulic disc
BRAKE LEVERS: Hayes hydraulic
FRONT HUB: Novatec 20 mm Q/R
REAR HUB: Formula 135x10 throughhole
RIMS: Alex Supra BH 26" 32H
SPOKES: DT Swiss Black
TIRES: Kenda Blue Groove/Nevagal 26x2.5" (70% tread at least)
SADDLE: Axiom Dirtjump
SEATPOST: Axiom comp
COLOUR: PINK! or watever you want (see last page 3 of posts)
SIZE: Medium!
http://www.norco.com/bikes/2004bikes/images/pixel.gif

Pictures:


currently running single speed with regular cassette on one of the middle chainrings (straight driveline).. as its horizontal drop outs theres no tensioner needed.. never drops a chain... both hydro brakes supplied, but front one is not attached as either i need an 8 inch rotor adaptor for the forks (i bought them 2 weeks ago, and havent got round to an adaptor), or i can send a free 6inch rotor to the lucky buyer, and then you can put the front brake on fine.

can supply shimano SAINT Rear Derallieur, and shimano deore xt front derallieur, as well as deore xt shifters x2 if you would like to put it back to gears for free.

nice bashring.. all parts in good order.. the whole lot has shed sat for ages.. and i got it out and painted it (see my guide in how to, its a good job:) )in anticipation of gettin off my arse but due to too many other commitments i give up..

http://i32.photobucket.com/albums/d39/oliverthedestroyer/IMG_2131.jpghttp://i32.photobucket.com/albums/d39/oliverthedestroyer/IMG_2134.jpg
http://i32.photobucket.com/albums/d39/oliverthedestroyer/IMG_2130.jpghttp://i32.photobucket.com/albums/d39/oliverthedestroyer/IMG_2136.jpg

[santacruzmtb]

If its a forumla hub on the rear how will a saint derailer be usefull?

[oleitch]

:confused:

the hub has nothing to do with it? its just a hub... :confused::confused:

the only thing with the saint RD is that it wont mount at a very good angle due to the horizontal dropout, it'll go on (my lbs put it on for for me), but it wont perform that well as its on a funny angle (so i decided to go ss as that was what i was heading for anyway), however there is a saint adaptor for horizontal dropouts so get one of those and itll be happy happy joy joy. but thats only if you want gears... its got the perfect ratio for dj so i had no reason.

[oleitch]

im so over waitin to sell this thing.. send me an offer and we shall see? nothin too rediculous though

oliver

[oleitch]

price drop. 1200.. all offers considered

[oleitch]

dont mix drinks kiddies

[oleitch]

rumble-pack

[oleitch]

get back up there!

[oleitch]

bump it up

[oleitch]

yepyepyep good bike

[oleitch]

jjjjjjjjjjjjjjjjj

[oleitch]

kkkkkkkkkallllllllump

[oleitch]

hjjjjjjjjjjjjjjjjjj

[konakilla]

would you go any lower

[konakilla]

:confused:

the hub has nothing to do with it? its just a hub... :confused::confused:

the only thing with the saint RD is that it wont mount at a very good angle due to the horizontal dropout, it'll go on (my lbs put it on for for me), but it wont perform that well as its on a funny angle (so i decided to go ss as that was what i was heading for anyway), however there is a saint adaptor for horizontal dropouts so get one of those and itll be happy happy joy joy. but thats only if you want gears... its got the perfect ratio for dj so i had no reason.

you need a saint rear hub for a saint deraliur i have one and you need the saint hud as its conected to it

[oleitch]

well then are you intersted in buyin it?

[oleitch]

Then it must be a rear saint hub, as the saint deurallier and the hub were both on my last frame together and came out of the factory that way.

i did think it was a formula hub though as per norco website,

so tell me anyone, what is it?

but the point is they work! so please dont fill thread saying they dont

[mrsquashed]

you've had it solidly at $1200 for about 3 months
why not try $1000/ono.

[oleitch]

well i thought 1200 was a fair price considering other 250's on farkin at the moment...

but your right in the time its been there for so if anyones interesting say 1100?

[oleitch]

bump
dagfdsg

[garden_gangster]

is it still for sale? are they 24" wheels? and also i hav no idea about tubes..can i just swap those french valve tubes to normal ones without changein rimms or anything...yeh i know its a noob question

[Matt H]

They'll either fit, or you'll have to drill the rims out

[garden_gangster]

ok thats easy then, just checkin. Im ganna make it a diferent colour but if i buy it..pink isnt for me lol

[francis]

you killed a 250 with that yat colour what were u thinking :mad:

[garden_gangster]

at least its a good job not just sprayin ova the old paint with like $2 cans or somethin lol but yer i think pink is abit to flambouant for me. Do you have any pics from before you painted it? was it pretty scratched before hand?

[Da Extreme Free Rider]

you killed a 250 with that yat colour what were u thinking :mad:

Yep lm with francis there

[oleitch]

Ok, price drop $1050! Hardly seen any use since new... Will repaint frame for cost of paint and gettin lbs to take cranks out (i dont have a crank puller).. Probably about 50$. (Can do custom camo, two tone or whatever you want if you buy the paint) I enjoy painting :)

Really is time to sell her.

[oleitch]

bump bump bump

[Renegade]

you killed a 250 with that yat colour what were u thinking :mad:

WTF does that have to do with the sale, shutup if you have nothing of use to say.

[oleitch]

thanks renegade

[oleitch]

gargen gangster.. yeah frame had a few scratches.. but really it was just a dark brown colour which i didnt like

[oleitch]

yarrr still for sale me hearties.. if anyone was thinkin about gettin a paintjob from me check out my thread... thats right along with mr plow i wrote the frame painting guide in the how to section :D its stickied to the top

custom coloured pimpin machine?
you pick it!

[hidesy]

ive got $800 atm if u want to sell it for that and u dont have to inclued any of the deralers or the front brake,, pm us if ure interested

[oleitch]

still around

[oleitch]

make an offer! dying to sell for new guitar

[peter_h]

I'm interested in the forks, is that an option?

[oleitch]

yeh im thinking about splitting, what price you looking at?

[oleitch]

price drop 1000

[oleitch]

950 ssssssssssssssssssssssssssssss

[oleitch]

price drop 900! will deliver to sydney this friday only! bought new guitar and am soo short of $$$$$$$$$ please buy its a bargain in mint condition~!

[oleitch]

beard,

sounds like hump

[oleitch]

price drop, again

[oleitch]

yeh new pics up

[oleitch]

pirates vs ninjas

[oleitch]

sale pending

[takai]

Rather than starting another thread, i was wondering if you had any pictures of the Saint rear on the bike, as im considering doing a similar thing to my P2.
Cheers