Quik question - Installing BMX Sprocket

[Renegade]

Hey guys
just need some quik help
Frame came in the mail today and I need to install the sprocket back onto the frame. Its a 03 norco 125 frame with the stock axiom 3 peice cranks. How do I go about to install the sprocket back on. Thanx

[cdfeto]

Sprockets usually go onto cranks.

[julianwisbey]

undo the crank bolt slide off the crank arm (or smash it off with a rubber mallet)
then undo the 6mm allen in the back then check you have the right size reducer if it needs it and put it on then do up the bolt and slide em back on and do up the crank bolt DONE !!

[Renegade]

Thanx mate.. How do I take the bmx cranks and put the ring on and install the cranks back on. The info you gave me what much appreciate cough*

[Randy Rhoads]

Just attach the sprocket onto the crank (it will have a bolt bit) and then just put the cranks back on and tighten the main bolts.

Easy as pie.;)

[julianwisbey]

all you need to do now is give me the shifter :mad:

[Renegade]

all you need to do now is give me the shifter :mad:

Thanx mate I was referring to the other guy didnt mean to say you were unhelpful and will post the shifter tomorrow sorry Been busy Dont think i can come 2 terry hills might be though so Ill bring it if i do cheers