santa cruz blur 4x + e13 = ?????

[steel-o]

hi all,

i have recently aquired a sc blur 4x and am trying to fit a e13 srs to it. it's quite diificult due to the lower hinge interferring with the e13. i fixed it by rotating the e13 but now it's a bit out of adjustment because rotated to0 much in the anticlock wise direction. is this how it should be??


any info very welcome


cheers


steel-o:rolleyes:

[j5ive]

Yeop, its pretty shitty. Just run it back as far as you can, from memory I cut some plastic from the top, above the roller- to get it closer. I also has a solid bit of rubber zip tied to the chainstay above the roller to stop slap.

[steel-o]

thanck's for that i thought i was doing some thing wrong, i will be interested to have a close up look at a sc 4x demo bike/ pro bike to see how they are using a e13 set up.

steel-o

[j5ive]

http://willowglenbicycles.com/images/library/site/santac_blur4x_280_05_p.jpg
Gives you a pretty good idea. A gamut guide would work a little better.

[steel-o]

for this picture it looks like they mix and match a 36 bashring with a 40 back plate???