SOLD

[lotec]

Item: 02 m1 frame good condition, spare rear shock (03 brand new vanilla rc) wheelet (deore disk hubs (qr rear 20 mm front) laced to singletracks including rear 8" hayes rotor and casette (not much but hey theyre wheels 8) )) axle spacers to run qr, aheadset headset, seatpost (dont know what brand) sella italia genuine gel saddle with ti rails, new norco grips (not lockons but these things DONT MOVE) truvatriv 42 tooth dh chainring and bashguard (few scratches and NO dents on guard) to suit a 4 arm spider.
Location: blackheath in the blue mountains
Item Condition: most of it is very good or brand new, frame has NO dents and a few scratches VERY GOOD CONDITION
Reason for selling: realised for the price to build this up with ok... parts spec i can get a brand new WHITE bb7 with AWESOME top of the line parts, i just bought this frame a week ago and now im selling again DAMIT make up your mind david!
Price and price conditions:
$1500 frame and one shock $1800 with both
$300 for the wheelset including one 8" rotor and a 9 speed casette
$150 for the seat but will throw it in if you buy the frame rails are dead straight
$seatpost and headset come with frame...
$axle spacers are free :D also with frame :roll:
Extra Info: would MUCH prefer if someone can pick it up as i cannot imagine how hard this would be to pack and im having nightmares about trying to convince mum to drive me 200 kms to your house or whatever :roll:
Pictures: sorry dont have access to a camera and by the way the frame is pimpin' white 8)

[lotec]

oh and dont say "make up your mind are you really going to sell" etc etc etc..... as i know i have been stuffing around chainging my mind a hell of a lot but this is DEFINATLY going i sort of bought it in a bit of a rushed decision i wanted it but there were other people who also wanted it and i had the money so i jumped in with my hands tied behind my back before i really thought about what i was doing and i got a rough estimate on prices to build it up with parts from o/s which i knew was a long way off our prices but i didnt know exactly how far, o/s $300 for a set of hugi freeride hubs here $1000!!! :shock: so i have enough to build it up with mediocre parts or i can get a brand new WHITE (only 2 in australia) bb7 with top of the line parts for the same price

[lotec]

bump all the parts are still for sale as is the spare shock and ive found a buyer for the frame (daver) but he needs one of you kind souls to buy his frame so he can buy mine....

[jays_5000]

If you can find the eye to eye length of the shock I might be able to buy that.

[neko]

If you can find the eye to eye length of the shock I might be able to buy that.

Poor little bikeless man. What you going to do? Make a pogo stick out of it? :D

[lotec]

ill get it for you tomorrow dont have anything to measure with at the moment lol, you gonna put it in your ryde? :D jks man

[jays_5000]

Yeah I would put it on my Ryde if I still had it.

Plans are for new linkages and shock for a big hit so I need an eye to eye length of 8.75"...

But I guess it won't make shit all difference if I have 6.3" or 8.1" in the rear because either way, I will still have to wait for Neko to catch up before I can begin pushing back up the trail again.

[lotec]

its an 8.5 inch (or close) eye to eye just measured and thats around what it is (doesnt help that the collars in the way of putting a tape measure against the shock) so yea 8.5 it is, close enough for you? (itll drop ur bb down and slacken your head angle a TINY bit that all...) if you do decide to take it....

[jays_5000]

Decide on a price and I'll let you know.

I'm not keen on the slacking the head angle off, because I'm already going to be running some pretty high forks.

[Jaz]

Jays, are you trying to upgrade the a-line already mate? or did you not get that in the end?

[jays_5000]

Nah, no A-line for me anymore.

[lotec]

if daver doesnt want the spare shock with the frmae he says he probably doesnt but he might sell his bullit frmae with it.... then how does $300 sound, its an as new (ask daver theres not a scratch on it) 03 thts barely been ridden...

[S.]

I'm 99% sure M1s do in fact use 8.75" eye to eye shocks. Were you measuring exactly from the middle of the eyelets? Because 1/4" is only about 6mm...

[lotec]

might just be me........ lol

[bikeman_baldrik]

Yes, the Intense M1 runs a 222mm eye to eye shock. Unless you have one of the new ones designed around a 5th element which runs a slightly longer shock.

lotecsiriusconcept,
Where about in blackheath are you, I'm in katoomba and i can't say i've seen you round at all.
Do you know Timon or any of the guys up there?
Let me know when you get ur bike running and we can hook up 4 a ride.

[neko]

But I guess it won't make shit all difference if I have 6.3" or 8.1" in the rear because either way, I will still have to wait for Neko to catch up before I can begin pushing back up the trail again.

Heh, you wish it were true.

[lotec]

*bump* its all still for sale buy davers frmae so he can buy mine though! dont have anyone interested in any of the parts though so MAKE ME AN OFFER and you never know i might just say yes :wink:

[lotec]

*BUMP* BUY THIS FRIGGIN' FRAME! ok much as i will regret this as every bit i drop the price i have to work off myself $1500 frame and 1 shock! or 1800 with 2! you buy both shocks ill thrown in the seat! come on people buy this :twisted: i NEED to sell it or someones gonna buy my bb7 out from under me argh :shock:

[wonderllama]

wats the front hub????

[wonderllama]

wats the front hub????

[lotec]

deores on singletracks both ends front is a 20 mm and the rear is a 135mm wide qr

[bikeman_baldrik]

How can the DEORE front hub be 20mm???
Deore doesn't come with a 20mm axle- unless it is a new product?

[lotec]

ffs..... i was convinced it was a deore but these have been in a box for so long i din even bother checking :oops: its actually a Novatec DH 20mm axle hub dammit david know what your selling... :?

[lotec]

bump, still only $1500!

[lotec]

*update* the seat is no longer for sale as i snapped it today :oops: